Please note that for safety reasons this product cannot be sent in the mail, we will despatch all orders via parcel courier.
Heavy Duty Spray Adhesive
Method of Use
Heavy Duty is a contact adhesive which forms its bond by sticking to itself, so for good long term results, it is always best to coat both surfaces if possible from approximately 10 inches (25cm). Spray one surface horizontally and the other virtically, allow 1-2 minutes to dry; After use, invert can and spray to clear nozzle. Excess adhesivecan be easily removed using Solvent Cleaner. This Adhesive is not suitable for heavily plasticised PVC. An evaluation of the adhesive should be carried out in application conditions before commercial use is undertaken.
Handling and Storage Considerations
Whilst handling the adhesive, we advise to avoid spillage keep away from heat, sparks and open flames and to use in a well ventilated areas. For best results the adhesive should be stored at temperatures between 15°C
25°C.Heavy duty Adhesive needs to be stored at temperatures between 10°C-20°C in dry, well ventilated areas and must not be exposed to direct sunlight or temperatures above 50°C
Portable: Lightweight 500ml Aerosol.
Ease of Use: Point and Spray
Clean : Every application is a fresh application.
Quick Bonds in 1-2 minutes
Strong High Coat Weight
The Heavy Duty Aerosol must be disposed of safely, in accordance with local authority requirements. the empty aerosol must not be burned due to explosion hazards.